SAEC analog accessories: realize the full potential of your analog front end.
SS-300Mk2 Solid Turntable Mat
This is the Mark II model, a revival of the SS-300 solid turntable mat, which was released over 40 years ago and became a sensation, using modern, advanced metalworking technology. SAEC’s philosophy remains unchanged: for the cartridge to pick up every minute signal etched into the grooves of a record, it’s ideal for the record to be placed on a highly precise and rigid material. The SS-300Mk2 is based on the philosophy and design of the SS-300, with careful selection of the aluminum material, choosing Kobe Steel’s high-precision aluminum alloy “Alhais”*. Emphasis is also placed on manufacturing precision, with each piece meticulously machined to an accuracy of 30μm. The five circular holes on the mat suppress unwanted resonance and further balance the dynamics, ensuring that it does not negatively affect the turntable’s rotation. Usage is extremely simple: just remove your current turntable mat and place this one in its place. Click here for a cross-section of the mat.
Features
The SS-300Mk2 is characterized by its beautifully resonant sound, which makes vocals stand out in vocal-based music and reproduces a smooth sound. Furthermore, it brings out the unique characteristics of the cartridge being used without adding any unwanted coloration, thus expanding the enjoyment of analog audio.
Specifications
- Material: Uses “Alhais”*, which boasts low residual stress and excellent surface flatness.
- Finish: Anodized coating
- Outer diameter: Φ300mm
- Thickness: 5.5mm
- Weight: 845g
*Alhais is a high-precision, thick aluminum plate manufactured by Kobe Steel using the A5052P aluminum alloy. It is engineered specifically to meet the strict demands of precision machining and manufacturing by maximizing flatness and dimensional stability
SRS-9 high-performance record stabilizer
The SRS-9 is an innovative record stabilizer that employs an SVM (Suppress Vibration Material) mechanism, unlike any previous product. The SVM mechanism is characterized by its structure, which incorporates nine separate stainless steel weights. Each weight applies the optimal load according to the slight warping of the record surface, keeping the entire record flat and effectively suppressing vibrations. This method also frees the cartridge stylus from unnecessary vibrations as it traces the record groove, allowing it to pick up all the signals etched in the groove without loss. As a result, the signal-to-noise ratio is increased, the spatial expression is improved, and superior sound is created. Furthermore, by keeping the weight to under 300g, it can be used safely even with record players with low torque, without putting undue stress on the bearings.
Features
- Nine independent stainless steel weights employing an SVM mechanism effectively suppress vibrations.
- Each weight provides optimal load for even the slightest warping of the record, reducing noise levels.
- Acoustically superior resin is used for the part that contacts the turntable spindle, preventing unwanted vibrations and protecting the spindle.
- With a weight of less than 300g, it can be used even with turntables with low torque without causing load fluctuations.
Specifications
- Material: Disc part (holding part) hard aluminum, weight part stainless steel
- External dimensions: Φ72 × Height 21.5 mm
- 質量：298g
More coming.
